| |

| | |

POYRAZ SERIES THERMALL T-30/100 BUSINESS STOVE WITH MIS DRY AIR BLOWN FAN

   Poyraz Series products; These are dry air blown stoves produced to heat areas such as workplaces, cafes, poultry farms and greenhouses. Our stoves are produced in 3 different capacities that offer heating up to 200, 500 and 1000 m^2.

    On the front of our stove, which is produced for 200 m^2 areas; There are 21 blowing pipes through which the heated air comes out, and a powerful fan on the back side that can heat the air in the environment and blow about 8 meters. In addition, the soot that will form over time between the cleaning handle and the pipes in front of it can be easily cleaned. The waste gas outlet chimney on the upper side of our stove is the size of standard stove chimneys and is designed as 13 centimeters. Thanks to the bowl grill and screening system in the combustion chamber, the design of which belongs to our company, you can get maximum efficiency from the fuel and extend the combustion time as much as you want by adding fuel without the need to ignite it again. The area around the cast grid is completely covered with firebricks. With these inclined fire bricks, both the volume of the combustion chamber was increased and the damage caused by the embers to the outer sheets was prevented. When the stove is to be extinguished, the tilting lever you will use to empty the inside is located on its side. air circulation lever located behind the stove; During the first ignition, it transmits some of the air under the combustion chamber and in this way easy combustion can be achieved. However; It heats up on the side walls and radiates heat around it thanks to the convectional channels in the specially designed cabin sheet. Thanks to the large fuel loading hatch on the side of the stove, it is suitable for burning all kinds of solid fuels as well as burning large pieces of wood and logs, and at the same time it can be supplemented with coal. Thanks to the large-volume ash pan located under the stove, the ash discharge process can be carried out at longer intervals.

    The mechanical parts of our stoves for 2 years, the electronic parts for 1 year are under the guarantee of our company and technical support can always be provided with our dealers in your region. After achieving the desired efficiency in the designs of our stoves, it is intended to exhibit a stylish image in the region used. Therefore, our products are often preferred in cafes and restaurants other than workshops. Our stoves have brought themselves to the forefront with their efficiency over the years and are the most economical and practical solution in this field.

 

MEASURES

30.000 kcal/h = WIDTH: 700 mm DEPTH: 1070 mm HEIGHT: 1240 mm CAPACITY: 200 m^2

60.000 kcal/h = WIDTH: 770 mm DEPTH: 1150 mm HEIGHT: 1420 mm CAPACITY: 500 m^2

100.000 kcal/h = WIDTH: 670 mm DEPTH: 1140 mm HEIGHT: 1560 mm CAPACITY: 1.000 m^2

 

PROPERTIES

  • 200 m^2 Area Heating Capacity
  • Dry Air Blowing System
  • Air Spreader Fan Assembly
  • Large Fuel Load Tailgate
  • Bowl Grill
  • Elimination and Tipping Arms
  • Large Volume Ash Bucket
  • Possibility to Burn All Kinds of Solid Fuel
  • Silent Operation Feature
  • Combustion Chamber Surrounded by Fire Brick
  • Heat Resistant Static Paint
  • Heat Radiating Feature to the Environment